U$S $
0

Recibí aproximadamente entre 10 y 15 días hábiles

Pasa el mouse para ver la imagen ampliada

Silatu

SILATU CNC Plasma Cutter Machine, 85Amp Blow Back Pilot Arc Air Sensor Technology, Large Screen Display,110V/220V Dual Voltage Non-Touch CNC Plasma Cutting Machine, 1 Inch Cutting Thickness

127 Calificaciones
STC550P
STC650P
STC650P MAX
STC750P
STC850P
STC850P MAX

Disponibilidad: En stock

Marca: Silatu

Peso con empaque: 10.703 kg

Producto con devolución

Producto de: Amazon

CNC Function: The SILATU plasma cutter is equipped with blow-back technology and a Non-HF (non-high frequency) pilot arc, which are compatible with CNC systems. This setup minimizes the risk of high-frequency signal interference, thereby improving cutting stability. The non-contact blow-back pilot arc initiation ensures that the arc starts without the need for physical contact with the metal. The machine features two connection ports: a 2-pin connector for arc voltage output at 1:1 ratio and 5-pin connector for signal control. This design facilitates seamless integration with CNC cutting tables.
Cutting Thickness:This Non-HF pilot arc plasma cutter from SILATU includes an automatic voltage detection system that works with both 110V and 220V inputs, operating on a single-phase power supply with a 60% duty cycle. It is optimized for cutting materials up to 12mm thick at 40A on 110V with 45 PSI air pressure, and up to 30mm thick at 85A on 220V with 70 PSI. For electrical safety, it requires a big current circuit breaker for 110V operation and a 50A breaker for 220V. The versatility of this SILATU plasma cutter makes it suitable for a wide range of materials, including stainless steel, alloy steel, mild steel, copper, aluminum, etc.
Digital Screen Display:The SILATU CNC plasma cutter's digital display panel provides a centralized view of key parameters such as air pressure, voltage, and current. This allows operators to monitor the machine's status in real-time and make adjustments as needed, enhancing operational efficiency. In the event that the blow-back plasma cutter does not function properly, the screen offers an error code system to assist in troubleshooting and identifying issues quickly.
Air Sensor Technology:An integrated air sensor displays the air pressure on the machine's front panel. Users can manually adjust the air pressure using the air regulator, as automatic adjustment is not available. An air filter is installed at the rear of the unit, featuring a quick-connect 1/4 NPT air fitting for easy setup. When connected to an air compressor, the recommended air pressure should be set to around 65 PSI, with a flow rate of approximately 250 liters per minute.
PT/2T/4T/PA Function:The post-flow cooling time, adjustable between 3 and 15 seconds, extend the life of the torch head and consumables. The 2T mode offers semi-automatic control over the torch trigger, whereas the 4T mode enables fully automatic triggering, freeing the operator's hand. The PA setting adjusts the duration of the pilot arc. Additionally, the SILATU plasma cutter model STC850P MAX incorporates a mesh cutting mode designed to prevent arc interruption when cutting mesh materials.
CNC CUTTING TORCH: Under the CNC function, we recommend using a straight torch, which is an optional accessory and not a standard component. The straight torch offers greater convenience, although it comes at a higher cost. We recommend either the PTM80 or the PTM60 models. Of course, the handheld cutting torch that comes with the machine can also be used with the CNC system, it just needs to be securely fastened

Ver más

SKU: B0DQYNYQHN

Ver Calificaciones

Precio: U$S 744.98 $ 31.920

Ahorras: U$S 44.99 (7%) $ 1920 (7%)

U$S 699.99

$ 30.000

Este producto tiene Garantía de Entrega

Agrega el producto al carrito para conocer los costos de envío
Recibí aproximadamente entre 11 y 15 días hábiles, seleccionando envío normal

15% OFF en compras menores a U$S 100 con cupón PEQUES15

¡Comprá en 12 cuotas sin interés con todas las tarjetas!

Este producto viaja > USA > Tus Manos

Más información para tu compra de SILATU CNC Plasma Cutter Ma...

abrir

¿Cuál es la valoración promedio de SILATU CNC Plasma Cutter Ma...?

La valoración promedio de SILATU CNC Plasma Cutter Ma... es 4 (basado en 127 reviews).

abrir

¿SILATU CNC Plasma Cutter Ma... tiene devolución?

Si, usted puede devolver el producto a nuestras oficinas de Miami (USA). Para ello se debe solicitar la devolución en su cuenta de Tiendamia dentro de los primeros 7 días de haber recibido el paquete. Los costos de devolución corren por cuenta del cliente. Más información en Políticas de devolución

abrir

¿A qué tienda pertenece este producto?

SILATU CNC Plasma Cutter Ma... pertenece al catálogo de Amazon

abrir

¿Cuánto demora el envío de SILATU CNC Plasma Cutter Ma...?

Los tiempos de envió pueden variar según el producto. Recibí SILATU CNC Plasma Cutter Ma... en tu casa en un tiempo de entre 11 y 15 dias.

abrir

¿Este producto tiene garantía de entrega?

Todas las órdenes tienen garantía de entrega en Uruguay. Si tu pedido no llegó luego de 60 días de realizada la orden, te devolvemos el total de tu dinero. Tener en cuenta que si la orden queda retenida en aduana por razones ajenas a Tiendamia (ejemplo: exceso de franquicias) no aplica esta garantía.

   
  Loading...