APPS2Car 3M VHB Adhesive Pads Replacement Tape, 4-Pack Double-Sided Mounting Pads for Magnetic Car Phone Mount, Sticky Sticker Tapes for Dashboard & Windshield Mounts - Grey

Color:

Rectangle - 1.9"x1.1"

Round - 1.38"

Detalles del producto

Disponibilidad:
En stock

Peso con empaque:
0.02 kg

Devolución:
Sí

Condición
Nuevo

Producto de:
Amazon

Viaja desde
USA

Sobre este producto

Important: Since the red film of the 3M tape is hard to tear off, in order to tear off the film more easily, we changed the red film with "3M" on it to blue film, but the black Vhb Sticky Adhesive Pads is original 3M tape. Note: 1,Please don't stick the 3M stick adhesive pad on very soft, rugged, texture,grease surface or leather surface. 2,Please remove the residual glue and clean the surface. 3,The 3M Vhb adhesive pad is one-time use. please sealed preservation. 4,It is Recommended to wait at least 24 hours after stuck before using. The longer the adhesive time, the stronger the viscosity will be. 5,Peel off the yellow protective film and press it at least 2 minutes then wait for about 2 hours before peel off the other side red film. If the red protective film is hard to peel off, please press it back once and try to peel off it again, don’t touch the gel with your hand after peel off. Easy installation： Step 1,Remove the residual glue. Step 2,Clean and dry the car phone mount base completely. Step 3,Tear off the yellow protective film. Step 4,Stick it on the car phone mount base and press it at least 4 minutes for better connecting to the base, then wait for about 2 hours to tear off the other side red film. Step 5,Clean and dry the smooth and hard flat surface thoroughly to ensure there is no dust or debris. Step 6,Tear off the other side red protective film, Then stick it on the cleaned dash surface firmly and press it at least 5 minutes to ensure that the adhesive pad and the surface fully bond.It is recommended to wait for at least 24 hours before use. If you hard to tear off the red protective film, please press it back ,then tear off it again.Don’t touch the gel with your hand after peel off the film. Package include: 4 X 3M Vhb adhesive pads 1 X use manual

U$S 9,99

34% OFF

U$S 6,64

U$S 9,99

34% OFF

U$S 6,64

Llega en 5 a 11 días hábiles

con envío

Tienes garantía de entrega

Medios de pago

Cantidad

Este producto viaja de USA

a tus manos en

Medios de pago

Conoce más detalles

Important Tips for Best Use: For effective adhesion, do not apply the 3M VHB pad on soft, uneven, textured, greasy, or leather surfaces. Always make sure the surface is clean and completely dry before sticking. The pad is designed for one-time use only. Please allow around 24 hours after application for the adhesive to fully set before use. Worry-free purchase—APPS2Car offers responsive and reliable customer support Strong Adhesion: Made with original 3M VHB GPH-160 double-sided adhesive pads (1.9" x 1.1", 0.06" thick), providing superior bonding strength—even in high-temperature environments. Stronger and more reliable than most standard adhesive pads Suitable for stick many kinds of material with flat hard surface. It can be used in home bathroom mirror, refrigerator, bed post, wall, locker, office, driving personnel and other related equipment replacement Rectangular 3M Vhb sticky adhesive tape can be used on the bottom of the most dashboard 360 degrees Rotation magnetic car phone mount holder, which is stable even in bumpy roads. It is a strong sticky adhesive replacement for phone car mount. Compatible with Wizgear, Bextrix, Scosche ,Trainium ,PLDHPRO ,Ailun etc. magnetic phone car mount This 3M Vhb adhesive pad is high-temperature resistance and low-temperature resistance, water-proof, Tear off non-trace