DIGITEN G1.5" Water Flow Sensor, Hall Effect Sensor Flow Meter Flowmeter Control 5-150L/min - Arduino, Raspberry Pi, and Reverse Osmosis Filter Compatible
Size:
1.5 inch
En stock
0.36 kg
Sí
Nuevo
Amazon
USA
- Specifications: Flow range: 5-150L/min Sensor: Hall effect Maximum current:10 mA(DC 5V) Working voltage range:DC 5-18 V Load capacity:≤10 mA(DC 5V) Operating Temp: ≤80℃ Operating humidity: 35%- 90%RH Allow compression:Water pressure 1.75 Mpa below Insulation resistance:>100M OHM Storage Temperature:-25℃-80℃ Storage humidity:25% - 95%RH Output Waveform:Square Wave,output pulse singal. Cable length:480mm Max Size:92mm*68mm Package include: Flowmeter x 1
IMPORTÁ FACIL
Comprando este producto podrás descontar el IVA con tu número de RUT
Conoce más detalles
✔Work for Arduino, Raspberry Pi, and Reverse Osmosis Filter. Small size, waterproof, easy to install, heat resistance, pressure resistance, cold resistance. ✔Material: All materials align with ROHS testing standards, and can be used for potable water. ✔Hall effect sensor. Flow range:5-150L/min, working voltage range: DC 5-18 V, allow compression: Water pressure 1.75 Mpa below. ✔Connect to G1.5 inch BSPT male thread, if used for NPT, need thread seal tape. Output waveform: square wave, output pulse signal. ✔Wide application: It is mainly used in water heater, coffee machine, water purifier, drinking fountain, beverage machine, campus smart card equipment, etc.