SKU/Artículo: AMZ-B092ZGJ3PB

KEYGMA

KEYGMA 0-10V LED Dimmer Switch, Low Voltage Dimmer Switch for Dimmable LED Lights, CFL, Halogen and Incandescent Bulbs, Single-Pole or 3-Way, Wallplate Included, ETL Listed (White, 1 Pack)

Size:

1 Pack

1 Pack

10 Pack

4 Pack

Color:

White

Black

White

Detalles del producto
Disponibilidad:
En stock
Peso con empaque:
0.36 kg
Devolución:
Condición
Nuevo
Producto de:
Amazon
Viaja desde
USA

Sobre este producto
  • Product Description: 0-10V LED Dimmer Switch for LED Lights The Keygma 3-way 0-10V LED dimmer provides optimal dimming performance of LED bulbs. This dimmer works with up to 150 Watts of dimmable LED/CFL or 600 Watts of incandescent/halogen, allowing you to control multiple bulb types on the same circuit. It is designed to control a broad range of dimmable LED and CFL bulbs from a variety of brands including GE, Philips, EcoSmart, Cree, Lighting Science and others. The LED dimmer features a paddle switch to turn your lights off or on returning the lights to your favorite level. This dimmer also features a discreet slide control next to the switch, allowing you to adjust the lights for any activities. Main Features ● Easily turn the lights on and off with a paddle switch, and use the fluent slide control to adjust the lights to the perfect level. · It can be used for single-pole and three-way applications. · This 3 ways LED dimmer switch requires a 0-10V power supply/drive. · Input: AC 120V~277V 50~60Hz. · Meet UL standard, high quality. The dimming effect is very good. · Fast and Easy Installation, just replace your existing light switch with the Keygma 3-way 0-10V LED dimmer and install in less than 15 minutes. · Includes instructions, wall plate(white), mounting screws and wire caps. Installation Instructions 1.Switch off the circuit breaker for the intended installation area. 2.Remove any existing switchplate. 3.Verify there is no power to the switch to be replaced. 4.Remove exsiting switch. 5.Identify and disconnect power wires from switch. 6.Use the wiring diagram (see the user manual) to connect the dimmer switch between a 0-10V power supply and 0-10V LED light fixture. 7.Carefully replace wiring back into wall box, mount the three-way LED dimmer with supplied screws. 8.Install switchplate. 9.Switch power back on at circuit breaker.
U$S 48,38
55% OFF
U$S 21,99

IMPORTÁ FACIL

Comprando este producto podrás descontar el IVA con tu número de RUT

U$S 48,38
55% OFF
U$S 21,99

¡Comprá en hasta 12 cuotas sin interés con todas tus tarjetas!

Llega en 5 a 11 días hábiles
con envío
Tienes garantía de entrega

Conoce más detalles

0-10V low voltage LED dimmer switch, 5%-100% dimming ability, provide the best dimming performance for dimmable LED lights. For use with up to 150 Watts of dimmable LED/CFL and up to 600 Watts of Incandescent and Halogen lamps. Features a large rocker paddle to turn lights on/off or to preset level and a fluent slider to brighten/dim lights to suit different activities. The 0-10V LED dimmer switch can be used in single pole or 3-way applications. Providing precise full-range dimming control. No neutral required. Easy to install and use. AC 120V~277V 50~60Hz input. Single Pole & 3-way low voltage LED dimmer switch for LED lights, ONLY support LED/CFL and Incandescent lamps with 0-10V driver. Make sure all your bulbs/lamps or LED lights are marked dimmable and with 0-10V Driver. DO NOT buy the wrong dimmer switch. Please note that our 0-10V dimmer switch could be compatible with most led lights, not 100%. If your lighting fixture is not compatible with our LED dimmer. Please change the 0-10V dimmer switch or your lighting fixture. Or return the 0-10V dimmer back. If still buzzing, flicker or flash, please adjust the sensitivity dial slowly until the symptom is no longer present. (Better adjust it before install, the sensitivity dial is at the bottom of back side of the Dimmer Switch)