702 Generator Controller Board – DSE702 MS HC Manual Start Control Panel for PTO Generators, Compatible with Diesel & Gas Generators

Detalles del producto

Disponibilidad:
En stock

Peso con empaque:
0.36 kg

Devolución:
Sí

Condición
Nuevo

Producto de:
Amazon

Viaja desde
USA

Sobre este producto

Specifications: Model: 702 MS-HC Size: 8.5 x 7 x 3.8cm/3.45 x 2.76 x 1.50inch Weight:157g : Hours counter provides accurate information for monitoring maintenance and periods Multiple engine parameters are monitored simultaneously. Manual Mode 1.The module is started using the on-board key/buttons 2.The user turns the key to the palm position 3. The engine pre-heat button is then pressed for the required time 4. The start button is then pressed to start the engine 5. To stop the engine the key needs to be turned to the off position Overspeed : The engine over speed trip setting can be calibrated at the rear of the module for 50Hz or 60Hz nominal (57Hz or 68Hz trip respectively). During engine cranking and for the first 10 seconds after the engine starts running, all alarm conditions are suspended (overspeed is enabled) to allow the engine to touch its running speed. Package Included: 1 x 702 MS-HC Generator Controller 2 x keys 2 x screws

Producto prohibido

Este producto no está disponible

Medios de pago

Conoce más detalles

The DSE701 module includes a remote start input. This input allows the module to be started from a pre-defined remote location. The user turns the key to the palm position, the engine pre-heat button is then pressed for the required time, the start button is then pressed to start the engine, to stop the engine the key needs to be turned to the off position. With the function of LED indicating fault information. The 702 MS-HC is available in manual start versions, offering an excellent range of engine monitoring and features. 702 MS-HC Generator controller is microcomputer control,it has the function of LED indicating fault information and the LCD running accumulative time.