Garantía de entrega
Lightyear 3d
Magnetic G10 Garolite 3D Printer Build Plate for PLA, PETG, ABS, and Nylon for Bambu Lab X1C, P1S, X1, P1P, A1, X1E
Size:
256x256mm
Disponibilidad:
En stock
En stock
Peso con empaque:
0.63 kg
0.63 kg
Devolución:
No
No
Condición
Nuevo
Nuevo
Producto de:
Amazon
Amazon
Sobre este producto
- Easy Bed Adhesion - PLA, PETG, ABS, and Nylon stick to the G-10 composite bed without the use of glue-stick, hairspray, or painters tape
- Magnetic Base - We use a cold-rolled sheet of stainless steel to magnetize the G-10 build plate, making swapping surfaces easy
- Easy Print Removal - Parts pop off the build plate once the surface returns to room temperature
- QR Code - We included the QR code for the High Temp PEI plate, so you don't have to manually start prints
- 1.5mm Thick G-10 - Thick enough to stay perfectly flat, while being thin enough to flex large prints off the build plate.
- Simple to Maintain - Just wipe with isopropyl alcohol after each print. Build plate comes pre-textured, so there is no need to sand the surface down yourself.
- Easy to Install - Remove your printer's original build plate, and replace it with the Magnetic Composite Build Plate.
U$S 97,48
49% OFF
U$S 49,99
IMPORTÁ FACIL
Comprando este producto podrás descontar el IVA con tu número de RUT
U$S 97,48
49% OFF
U$S 49,99
¡Comprá en 12 cuotas sin interés con todas las tarjetas!
Llega en 5 a 11 días hábiles
con envío
Tienes garantía de entrega
Este producto viaja
de USA ![]()
a tus manos en
![]()
a tus manos en
Compra protegida
Disfruta de una experiencia de compra segura y confiable
![]()
Garantía de entrega
Con Tiendamia todas tus compras cuentan con Garantía de Entrega o devolución total de tu dinero.
Compras 100% seguras y garantizadas, para que pidas lo que soñás y lo recibas del mundo a tu puerta.
Saber más.
Tarjetas prepagas, debito, y credito
Paga hasta en 12 cuotas sin interés con tarjetas de crédito.
Visa
Mastercard
American Express
Dinners
Discover
Lider
Midinero
OCA
OCA Blue
Tarjeta PREX
Pagos a través de PayPal
Paga en dólares con Tarjetas internacionales a través de PayPal.
PayPal
Conoce más detalles
Easy Bed Adhesion - PLA, PETG, ABS, and Nylon stick to the G-10 composite bed without the use of glue-stick, hairspray, or painters tape Easy Print Removal - Parts pop off the build plate once the surface returns to room temperature Magnetic Base - We use a cold-rolled sheet of stainless steel to magnetize the G-10 build plate, making swapping surfaces easy QR Code - We included the QR code for the High Temp PEI plate, so you don't have to manually start prints 1.5mm Thick G-10 - Thick enough to stay perfectly flat, while being thin enough to flex large prints off the build plate. Simple to Maintain - Just wipe with isopropyl alcohol after each print. Build plate comes pre-textured, so there is no need to sand the surface down yourself. Easy to Install - Remove your printer's original build plate, and replace it with the Magnetic Composite Build Plate.
