DONGKER INA260 Voltage Power Sensor Module,DC 3.0V-36V Voltage Tester Sensor Module with 8Pin Male Pin for Measure High Low Volt Current

Detalles del producto

Disponibilidad:
En stock

Peso con empaque:
0.10 kg

Devolución:
Sí

Condición
Nuevo

Producto de:
Amazon

Viaja desde
USA

Sobre este producto

Description:1.It is compatible 3V or 5V logic and can measure bus voltages up to+36VDC. Not applicable to AC voltage.2.Most current measuring devices have some obvious limitations in their operation, which restrict their use. Many are only on the low side, which may cause problems when the grounding reference changes with the current. Other devices (such as its sister INA219B) avoid this situation by measuring the high side, but need to modify their shunt resistors to measure different current ranges. INA260 avoids these limitations and, with its integrated precision shunt resistor, can be used for continuous measurement of+36V and up to 15A currents on either the high or low side. Wow!3.The voltage across the integrated 2 milliohms (0.002 ohms!), 0.1% shunt resistor is measured by an internal 16 bit ADC, allowing for impressive current range measurements at a resolution of 1.5 mA. The resistance of the resistor is so low that some multimeters record it as a short circuit4.In the high side configuration, bus voltage measurement and power calculation can be accurately retrieved, but advanced hackers who want to measure bus voltage in the low side configuration need to cut off the jumper connecting V+and VBUS, and connect the VBUS pin to the voltage bus.Feature: 1>.Ultra high precision 2>.High sensitivity 3>.Ultra small volume 4>.Easy to useParameter: 1>.Input Voltage: DC 3.0V-36V 2>.Measuring Current:36A(Max) 3>.Resolution Ratio:1.6mA 4>.Size: 23*23mmPackage:1 x INA260 Voltage Current Power Sensor Module1 x 8Pin Male Pin

U$S 24,99

5% OFF

U$S 23,74

U$S 24,99

5% OFF

U$S 23,74

Llega en 5 a 11 días hábiles

con envío

Tienes garantía de entrega

Medios de pago

Cantidad

Este producto viaja de USA

a tus manos en

Medios de pago

Conoce más detalles

This distribution board is likely to be the last current sensing solution you need to purchase. It can not only complete the work of two multimeters, but also achieve amazing accuracy and flexibility. With it, you can measure high or low voltage side DC current, bus voltage, and have it automatically calculate power. It can complete these tasks with an accuracy of over 1% within an impressive range of voltage, current, and temperature, while transmitting data in an easy-to-use format through I2C. INA260 Voltage Power Sensor Module is compatible 3V or 5V logic and can measure bus voltages up to+36VDC. Not applicable to AC voltage. The voltage across the integrated 2 milliohms (0.002 ohms!), 0.1% shunt resistor is measured by an internal 16 bit ADC, allowing for impressive current range measurements at a resolution of 1.5 mA. The resistance of the resistor is so low that some multimeters record it as a short circuit In the high side configuration, bus voltage measurement and power calculation can be accurately retrieved, but advanced hackers who want to measure bus voltage in the low side configuration need to cut off the jumper connecting V+and VBUS, and connect the VBUS pin to the voltage bus. SHOP WITH CONFIDENCE: To provide you with the highest quality service, If you have any question, please contact us.We will provide after-sales service .