U$S $
0

Recibí aproximadamente entre 10 y 15 días hábiles

Pasa el mouse para ver la imagen ampliada

Spray max

SprayMax 3680033, 2K Epoxy Rust-Cure Primer, Gray, Aerosol (2)

138 Calificaciones

Disponibilidad: En stock

Marca: Spray max

Peso con empaque: 0.860 kg

Producto con devolución

Producto de: Amazon

Excellent adhesion and corrosion protection properties, even critical surfaces such as aluminium
Outstanding insulating & sealing properties
Recoatable with all standard solvent-/ water borne basecoats or single stage topcoats
For cleaned and sanded surfaces

Ver más

SKU: B07YNY3RQP

Ver Calificaciones

Producto prohibido por la aduana de su país.

Continúa comprando

Este producto viaja > USA > Tus Manos

Más detalles del producto

SprayMax 3680033, 2K Epoxy Rust-Cure Primer, Gray,Aerosol The SprayMax 3680033 2K Epoxy Rust-Cure Primer is a 2K epoxy aerosol spraycan that has excellent corrosion resistance and maximum adhesion to bare metals. SprayMax uses innovative packaging to allow SprayMax aerosols to have more yield, faster workspeed, and a broader spray pattern than conventional aerosols. The results: professional paint results as with a spraygun, but without the disadvantages... no paint mixing, no cleaning of spraygun, no thinner for cleaning, no compressor, less overspray. SprayMax - patented technology only from KWASNY! How to Use SprayMax 3680033 Epoxy Primer: First, shake vigorously for 2 minutes before activating. To activate simply take the red button from the cap and attach it to the pin on the bottom of the can. Put the top of the can on stable ground and push the button firmly. Shake again for two minutes to ensure activator is thoroughly mix with primer. After activated SprayMax Epoxy Primer will last approximately 4 days. Product Characteristics: SprayMax Epoxy primer has excellent adhesion and anticorrosion properties. Can be used on Zinc-Coated Steel, Anodized Aluminum, Hot-rolled or Cold rolled Steel, Fiberglass, and many other surfaces. Preparation: Properly clean and sand surfaces to be primed. Use a good quality grease and wax remover before priming. Apply 2-3 coats of product. Allow 5-10 minutes between coats. After drying approximately 12 hours dry time lightly sand surface before recoating with topcoat or another primer. Salesman Notes: SprayMax Aerosols work much like a conventional spraygun. They have high transfer efficiency, and great atomization. Warning: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm.

Más información para tu compra de SprayMax 3680033, 2K Epoxy...

abrir

¿Cuál es la valoración promedio de SprayMax 3680033, 2K Epoxy...?

La valoración promedio de SprayMax 3680033, 2K Epoxy... es 4 (basado en 138 reviews).

abrir

¿SprayMax 3680033, 2K Epoxy... tiene devolución?

Si, usted puede devolver el producto a nuestras oficinas de Miami (USA). Para ello se debe solicitar la devolución en su cuenta de Tiendamia dentro de los primeros 7 días de haber recibido el paquete. Los costos de devolución corren por cuenta del cliente. Más información en Políticas de devolución

abrir

¿A qué tienda pertenece este producto?

SprayMax 3680033, 2K Epoxy... pertenece al catálogo de Amazon

abrir

¿Cuánto demora el envío de SprayMax 3680033, 2K Epoxy...?

Los tiempos de envió pueden variar según el producto. Recibí SprayMax 3680033, 2K Epoxy... en tu casa en un tiempo de entre 11 y 15 dias.

abrir

¿Este producto tiene garantía de entrega?

Todas las órdenes tienen garantía de entrega en Uruguay. Si tu pedido no llegó luego de 60 días de realizada la orden, te devolvemos el total de tu dinero. Tener en cuenta que si la orden queda retenida en aduana por razones ajenas a Tiendamia (ejemplo: exceso de franquicias) no aplica esta garantía.

 
 
  Loading...