U$S $
0

Recibí aproximadamente entre 10 y 15 días hábiles

Pasa el mouse para ver la imagen ampliada

Narex

Narex Dual Bevel Marking Knife Stainless Steel Blade Rosewood Handle Finger Indents (0.030" Thick Blade)

44 Calificaciones

Disponibilidad: En stock

Marca: Narex

Peso con empaque: 0.355 kg

Producto con devolución

Producto de: Amazon

A marking knife is an invaluable tool that should be in the toolbox of every woodworker. A good marking knife can produce crisp and well-defined marks on wood essential when laying out precision joinery or transferring measurements. Scribe lines left by a marking knife can also locate and guide chisels and saws. This Dual Bevel Spear Point marking knife is made by Narex, a world-class edge tool manufacturer in the Czech Republic.
The blade is made from AISI 420 corrosion resistant stainless steel and hardened and tempered to HRC 57. The blade is 1-7/8 inches long, 1/2 inch wide and comes in 3 thicknesses, 0.030", 0.060" or 0.100 inch thick. The blade has a dual-bevel spear point tip. The tip is ground to 55 degrees with a 25-degree grind on both bevels. The bevels are precision ground on CNC machines.
The dual bevel will mark distinct lines on both the right and left side of a part or guide. It will leave crisp lines when marking with and against the grain and on end grain. The knife may require just a light stropping to remove a small wire edge to get it razor sharp and ready to use.
The laser cut finger indents are useful for applying pressure closer to the tip. The blade is the perfect tool to make marks in narrow recesses such as when transferring pins/tails marks during dovetailing.
The handle is 3/8-inch-thick and made from Mexican Rosewood which has been hand sanded and polished. The scales are attached to the blade via two brass pins. The handle makes the perfect size for a nimble yet stout marking knife. The square handle profile prevents the knife from rolling off the bench.

Ver más

SKU: B0959XGZVV

Ver Calificaciones

Precio: U$S 37.37 $ 1.610

Ahorras: U$S 3.40 (9%) $ 150 (9%)

U$S 33.97

$ 1.460

Este producto tiene Garantía de Entrega

Agrega el producto al carrito para conocer los costos de envío
Recibí este producto de 5 a 11 días hábiles seleccionando envío

15% OFF en compras menores a U$S 100 con cupón PEQUES15

¡Comprá en 12 cuotas sin interés con todas las tarjetas!

Este producto viaja > USA > Tus Manos

Más detalles del producto

A marking knife is an invaluable tool that should be in the toolbox of every woodworker. A good marking knife can produce crisp and well-defined marks on wood essential when laying out precision joinery or transferring measurements. Scribe lines left by a marking knife can also locate and guide chisels and saws. This Dual Bevel Spear Point marking knife is made by Narex, a world-class edge tool manufacturer in the Czech Republic. The blade is made from AISI 420 corrosion resistant stainless steel and hardened and tempered to HRC 57. The blade is 1-7/8 inches long, 1/2 inch wide and comes in 3 thicknesses, 0.030", 0.060" or 0.100 inch thick. The blade has a dual-bevel spear point tip. The tip is ground to 55 degrees with a 25-degree grind on both bevels. The bevels are precision ground on CNC machines. The dual bevel will mark distinct lines on both the right and left side of a part or guide. It will leave crisp lines when marking with and against the grain and on end grain. The knife may require just a light stropping to remove a small wire edge to get it razor sharp and ready to use. The laser cut finger indents are useful for applying pressure closer to the tip. The blade is the perfect tool to make marks in narrow recesses such as when transferring pins/tails marks during dovetailing. The handle is 3/8-inch-thick and made from Mexican Rosewood which has been hand sanded and polished. The scales are attached to the blade via two brass pins. The handle makes the perfect size for a nimble yet stout marking knife. The square handle profile prevents the knife from rolling off the bench. Knife specs: Blade material: AISI 420 stainless steel hardened HRC 57 Blade profile: finger indents Blade length 1-7/8” Blade thickness: 0.030”, 0.060” or 0.100” Blade width: 1/2” Handle length 4” Overall length 5-7/8 Handle size: 3/8” thick by 1/2” wide Handle: Mexican Rosewood

Más información para tu compra de Narex Dual Bevel Marking Kn...

abrir

¿Cuál es la valoración promedio de Narex Dual Bevel Marking Kn...?

La valoración promedio de Narex Dual Bevel Marking Kn... es 4 (basado en 44 reviews).

abrir

¿Narex Dual Bevel Marking Kn... tiene devolución?

Si, usted puede devolver el producto a nuestras oficinas de Miami (USA). Para ello se debe solicitar la devolución en su cuenta de Tiendamia dentro de los primeros 7 días de haber recibido el paquete. Los costos de devolución corren por cuenta del cliente. Más información en Políticas de devolución

abrir

¿A qué tienda pertenece este producto?

Narex Dual Bevel Marking Kn... pertenece al catálogo de Amazon

abrir

¿Cuánto demora el envío de Narex Dual Bevel Marking Kn...?

Los tiempos de envió pueden variar según el producto. Recibí Narex Dual Bevel Marking Kn... en tu casa en un tiempo de entre 5 y 11 dias.

abrir

¿Este producto tiene garantía de entrega?

Todas las órdenes tienen garantía de entrega en Uruguay. Si tu pedido no llegó luego de 60 días de realizada la orden, te devolvemos el total de tu dinero. Tener en cuenta que si la orden queda retenida en aduana por razones ajenas a Tiendamia (ejemplo: exceso de franquicias) no aplica esta garantía.

   
  Loading...