U$S $
0

Recibí aproximadamente entre 10 y 15 días hábiles

Pasa el mouse para ver la imagen ampliada

Gba-szc

CR10 Hotend Upgrade Kit: 12V 40W Titanium Alloy Heatbreak, Brass Nozzle Kit, Compatible with CR10/CR-10S/CR-10S4/CR-10S5/CR-10 Mini 3D Printers

9 Calificaciones
12V Brass Nozzle Kit
24V Hardened Steel Nozzle Kit
24V Plated Copper Kit

Disponibilidad: En stock

Marca: Gba-szc

Peso con empaque: 0.355 kg

Producto con devolución

Producto de: Amazon

We choose the best materials that we can find on market combined with high precision CNC maching to bring this high quality nozzles (Tolerance 0.01 mm).Brass Nozzles High cost performance, Suitable for printing PLA ABS TPU PA and other conventional materials.
Our Heatsink and Heater Block is high quality fine processing aluminum .It is not low quality or cheap aluminum.Coupled with high-precision CNC machining, and strict quality assurance which brings the high-quality HOTEND Kit.
Thermal heat break is made from Titanium Alloy to provide excellent thermal isolation between heater and cooling block.Strict quality assurance.No burrs,anti-oxidation and clean surface.(reducing the chance of filament clogging)
The Heatbreak replaced by TC4 material into GRADE5.High quality raw material.High precision production.
Fits: CR-10 / CR-10S / CR-10-S4 CR-10-S5 / CR-10 MINI 3D Printer Ect.(If you are not satisfied with the product, you can exchange or return the product at any time.)

Ver más

SKU: B09DPPB2TS

Ver Calificaciones

Precio: U$S 50.46 $ 2.220

Ahorras: U$S 17.48 (35%) $ 760 (35%)

U$S 32.98

$ 1.460

Este producto tiene Garantía de Entrega

Agrega el producto al carrito para conocer los costos de envío
Recibí este producto de 5 a 11 días hábiles seleccionando envío

¡10% OFF EXTRA con IMPORTA10! Min. U$S 140 en productos

Este producto viaja > USA > Tus Manos

Más detalles del producto

Recommended slicer setting: retraction speed over 80MM/S retraction length 2.5-4MM If you are facing PLA clogging problem, please try the followings: 1. Increase the retraction speed. The speed may have being limited in the firmware try to change it. G-command "M203 E200" 2. Increase the extruder acceleration. Check your firmware settings. G-command "M201 E9000" 3. Reduce the retraction length. It depends on your machine setup. 4. Increase the nozzle temperature by 5-10 degrees. 5. Do not install the 2 screws for support the heatblcok like the stock hotend on the CR-10 printer. 6. Make sure that there is no gap between the heatsink and the heat breaker. NOTE: This product only supports 1.75mm filament!!! We found that many customers do not know how to properly install the nozzle. Remember the core issues in the installation process. Just make sure your nozzle and HEAT BREAK front end are tight and sealed. Otherwise, the filament will leak along the screw holes. Packing list: High quality MK8 Brass Nozzle 1.75/0.4mm x 1 Titanium alloy heat break 1.75MM x 1 High quality Aluminum Heater Block x 1 Aluminium Heatsink x 1 Thermistor (NTC 100K B3950 can be up to 300 degrees) x 1 Heater Cartridge(12V 40W) x 1 Silicone socks x 1 Finally:

Más información para tu compra de CR10 Hotend Upgrade Kit: 12...

abrir

¿Cuál es la valoración promedio de CR10 Hotend Upgrade Kit: 12...?

La valoración promedio de CR10 Hotend Upgrade Kit: 12... es 3 (basado en 9 reviews).

abrir

¿CR10 Hotend Upgrade Kit: 12... tiene devolución?

Si, usted puede devolver el producto a nuestras oficinas de Miami (USA). Para ello se debe solicitar la devolución en su cuenta de Tiendamia dentro de los primeros 7 días de haber recibido el paquete. Los costos de devolución corren por cuenta del cliente. Más información en Políticas de devolución

abrir

¿A qué tienda pertenece este producto?

CR10 Hotend Upgrade Kit: 12... pertenece al catálogo de Amazon

abrir

¿Cuánto demora el envío de CR10 Hotend Upgrade Kit: 12...?

Los tiempos de envió pueden variar según el producto. Recibí CR10 Hotend Upgrade Kit: 12... en tu casa en un tiempo de entre 5 y 11 dias.

abrir

¿Este producto tiene garantía de entrega?

Todas las órdenes tienen garantía de entrega en Uruguay. Si tu pedido no llegó luego de 60 días de realizada la orden, te devolvemos el total de tu dinero. Tener en cuenta que si la orden queda retenida en aduana por razones ajenas a Tiendamia (ejemplo: exceso de franquicias) no aplica esta garantía.

   
  Loading...