U$S $
0

Recibí aproximadamente entre 10 y 15 días hábiles

Pasa el mouse para ver la imagen ampliada

Hqrp

HQRP 3.6V Lithium Thionyl Chloride D-Size Battery Compatible with DSC ER34615M-T1 WT4911 WT4911B WT8911 ALEXOR Wireless Outdoor Siren WT4911BATT ADT

103 Calificaciones

Disponibilidad: En stock

Marca: Hqrp

Peso con empaque: 0.355 kg

Producto con devolución

Producto de: Amazon

NOTE: It can take a unit up to 30 minutes to fully depassivate a battery. HQRP® Battery Replacement;
Battery Voltage: 3.6V; Capacity: 14.5 Ah; Li-SOCI2; Lithium Thionyl Chloride;
Compatible with Original Battery; 200 Days Warranty!
Compatible with DSC ER34615M-T1 WT4911 WT4911B WT8911 Wireless Outdoor Siren WT4911BATT ALEXOR ADT;
Please pay attention: After removing the battery, wait no less than 30 seconds before inserting the replacement battery. High-quality HQRP battery, designed to start working immediately after installation. If your device does not function right away, it may require a depassivation procedure to activate the battery fully. NOTE: Make sure to follow the steps below for a brand new battery on the unit or if a battery is being replaced.
The WT4911 could lose power prematurely if a brand new battery is not used. 1. Hold the tamper switch closed before plugging the battery in. 2. Plug in the battery AND continue to hold the tamper for 10 seconds before releasing it. 3. Once the tamper is released, after the initial 10 seconds, the siren flashes the strobe in several different patterns to indicate it is in depassivation mode.
4. When depassivation is complete, the strobe lights shut off and the siren starts to beep 3 times every 5 seconds. NOTE: It can take a unit up to 30 minutes to fully depassivate a battery. If the WT4911/WT8911 determines that depassivation is not complete at the end of 30 minutes, it will automatically stop trying and beep once every 5seconds. If this occurs, the battery should be replaced.
5. Push in and then release the tamper switch. The WT4911/WT8911 will go into a normal power up sequence with 6 short beeps and flashes of the strobe lights. 6. The WT4911/WT8911 is then ready to be enrolled on the system or returned into service; NOTE: It can take a unit up to 30 minutes to fully depassivate a battery.

Ver más

SKU: B0CNTKRM7S

Ver Calificaciones

Precio: U$S 26.78 $ 1.170

Ahorras: U$S 4.83 (18%) $ 210 (18%)

U$S 21.95

$ 960

Este producto tiene Garantía de Entrega

Agrega el producto al carrito para conocer los costos de envío
Recibí este producto de 5 a 11 días hábiles seleccionando envío

¡Todo en tecnología con hasta 30% OFF y U$S 10 OFF pagando con PayPal!

Este producto viaja > USA > Tus Manos

Más información para tu compra de HQRP 3.6V Lithium Thionyl C...

abrir

¿Cuál es la valoración promedio de HQRP 3.6V Lithium Thionyl C...?

La valoración promedio de HQRP 3.6V Lithium Thionyl C... es 4 (basado en 103 reviews).

abrir

¿HQRP 3.6V Lithium Thionyl C... tiene devolución?

Si, usted puede devolver el producto a nuestras oficinas de Miami (USA). Para ello se debe solicitar la devolución en su cuenta de Tiendamia dentro de los primeros 7 días de haber recibido el paquete. Los costos de devolución corren por cuenta del cliente. Más información en Políticas de devolución

abrir

¿A qué tienda pertenece este producto?

HQRP 3.6V Lithium Thionyl C... pertenece al catálogo de Amazon

abrir

¿Cuánto demora el envío de HQRP 3.6V Lithium Thionyl C...?

Los tiempos de envió pueden variar según el producto. Recibí HQRP 3.6V Lithium Thionyl C... en tu casa en un tiempo de entre 5 y 11 dias.

abrir

¿Este producto tiene garantía de entrega?

Todas las órdenes tienen garantía de entrega en Uruguay. Si tu pedido no llegó luego de 60 días de realizada la orden, te devolvemos el total de tu dinero. Tener en cuenta que si la orden queda retenida en aduana por razones ajenas a Tiendamia (ejemplo: exceso de franquicias) no aplica esta garantía.

   
  Loading...