U$S $
0

Recibí aproximadamente entre 10 y 15 días hábiles

Pasa el mouse para ver la imagen ampliada

Kotbaniu

Bonnet and Poppet Repair Kit for FEBCO 765 1/2" and 3/4" Fit for Part Number 905-211 Backflow Preventer, Pressure Vacuum Breaker (1 Pack, Including Lubricant)

49 Calificaciones
905-051
905-052
BP211 with Canopy
BP211-1PCS
BP211-2PCS
BP211-4PCS
BP212-1PCS
BP212-4PCS

Disponibilidad: En stock

Marca: Kotbaniu

Peso con empaque: 0.355 kg

Producto con devolución

Producto de: Amazon

Package includes: 1 pcs bonnet and poppet repair kits with bonnet, stem, spare rubber ring, spring, lubricant, poppet, gasket, e-ring.
Suitable for:Fit for Febco 765 CBV 1/2", for Febco 765 DBV 3/4" for part number 905-211 backflow preventer, pressure vacuum Breaker. Note: Please check that part number 905-211 is the correct part you need before placing your order.
Material: Made of high quality material, lead free, strong sealing and long service life.
Easy to install: The bonnet can be installed by simply twisting it by hand. To facilitate installation, it is recommended that the included lubricant be applied to the bearings and threads before use.
After-sales service: If the product has any quality problems, we will provide 30 days return service.

Ver más

SKU: B0CW1GN3ZZ

Ver Calificaciones

Precio: U$S 26.59 $ 1.180

Ahorras: U$S 6.60 (25%) $ 290 (25%)

U$S 19.99

$ 890

Este producto tiene Garantía de Entrega

Agrega el producto al carrito para conocer los costos de envío
Recibí este producto de 5 a 11 días hábiles seleccionando envío

ENVÍO GRATIS en compras mayores a U$S 140 en productos con todas las tarjetas

Este producto viaja > USA > Tus Manos

Más detalles del producto

Specifications: --Colour: Yellow --Part Number: 905-211 --Material: ABS --Fit for FEBCO 765 CBV 1/2" --Fit for FEBCO 765 DBV 3/4" How to install? 1. Close the inlet and outlet shut-off valves to drain the residual water. 2. Remove the old bonnet and poppet and place the new poppet into the chamber. 3. Unscrew the nut from the top of the bonnet. 4. Put the bonnet post through the bonnet hole and turn it clockwise to fix the bonnet and poppet together. 5. Put the nut on the bonnet and tighten it. Note: A. In a few cases, if the problem of not tightening occurs, it is recommended to apply lubricant to the bonnet area as well as the threads. A wrench can also be used to tighten it properly. Do not over-tighten and cause damage to the product. B. After the installation is completed and the inlet valve is opened, splashing is normal, and the splashing will stop after the device is pressurized.

Más información para tu compra de Bonnet and Poppet Repair Ki...

abrir

¿Cuál es la valoración promedio de Bonnet and Poppet Repair Ki...?

La valoración promedio de Bonnet and Poppet Repair Ki... es 4 (basado en 49 reviews).

abrir

¿Bonnet and Poppet Repair Ki... tiene devolución?

Si, usted puede devolver el producto a nuestras oficinas de Miami (USA). Para ello se debe solicitar la devolución en su cuenta de Tiendamia dentro de los primeros 7 días de haber recibido el paquete. Los costos de devolución corren por cuenta del cliente. Más información en Políticas de devolución

abrir

¿A qué tienda pertenece este producto?

Bonnet and Poppet Repair Ki... pertenece al catálogo de Amazon

abrir

¿Cuánto demora el envío de Bonnet and Poppet Repair Ki...?

Los tiempos de envió pueden variar según el producto. Recibí Bonnet and Poppet Repair Ki... en tu casa en un tiempo de entre 5 y 11 dias.

abrir

¿Este producto tiene garantía de entrega?

Todas las órdenes tienen garantía de entrega en Uruguay. Si tu pedido no llegó luego de 60 días de realizada la orden, te devolvemos el total de tu dinero. Tener en cuenta que si la orden queda retenida en aduana por razones ajenas a Tiendamia (ejemplo: exceso de franquicias) no aplica esta garantía.

   
  Loading...