U$S $
0

Recibí aproximadamente entre 10 y 15 días hábiles

Pasa el mouse para ver la imagen ampliada

Jyjmdmg

DTRNYCZ Drone Parts for BETAFPV F4 2-3S 20A AIO FC V1 for Pavo 20 Pro Pavo Pico Brushless Whoop Quadcopter HX115 SE Toothpick Drones

Disponibilidad: En stock

Marca: Jyjmdmg

Peso con empaque: 0.355 kg

Producto sin devolución

Producto de: Amazon

Designed for HD VTX, it features a dual 9V@2A for DJI O3 and 5V@3A for external device BEC solution to screen blackout on the O3 due to low voltage during throttle increase.It includes a new O3 6-pin PMU for easy installation without soldering, reducing assembly complexity. Newbie friendly.
The power range of 2-3S provides increased thrust and improved control with a 20A ESC featuring a single NMOS for continuous current capability.
The upgraded onboard receiver allows selective power cutoff for saving power and offers additional UART TX3 and RX3 ports for connecting the external device.
Redesigned solder pad layout ensures larger, more secure pads for easy and reliable soldering, while the relocated USB port at the rear facilitates computer tuning.
It features an STM32F405RGT6 chip, Integrate Serial ELRS 2.4G receiver, 16M black box, barometer, current meter, reserve 3 complete serial ports and a standard SBUS, support , HD VTX, external receiver, and other equipment.

Ver más

SKU: B0F7LLPPXR

Ver Calificaciones

Precio: U$S 159.12 $ 6.820

Ahorras: U$S 53.04 (33%) $ 2270 (33%)

U$S 106.08

$ 4.550

Este producto tiene Garantía de Entrega

Agrega el producto al carrito para conocer los costos de envío
Este producto tiene una demora aproximada de 26 o más días hábiles y no tiene devolución
Trámite URSEC: U$S 8.99 $ 390

Tiendamia lo hace por vos

15% OFF en compras menores a U$S 100 con cupón PEQUES15

¡Comprá en 12 cuotas sin interés con todas las tarjetas!

Este producto viaja > USA > Tus Manos

Más detalles del producto

F4 2-3S 20A AIO FC V1 is specifically designed for HD VTX, utilizing 2-3S batteries for enhancing the flight experience. It features a dual BEC solution that delivers stable power outputs of 9V@2A for DJI O3 and 5V@3A for external devices. With a 20A ESC, it enables agile flight and increases dynamic. And connector for DJI O3 HD VTX and USB port for easy installation and maintenance. Ideal for HD VTX whoop enthusiasts, offering a heightened level of professionalism and convenience with this FC option.SpecificationWeight: 5.58g (without motor connectors and power ),5.92g (with motor connectors)Mounting Hole Size: 26mm x 26mmCPU*: STM32F405RGT6 (168MHz)Six-Axis: ICM42688P (SPI connection)RX: Serial ELRS 2.4G ReceiverRX firmware version: BETAFPV AIO 2400 RX ELRS V2.5.2: Enameled wireBlackbox Memory: 16MB: Barometer(BMP280), Voltage&Current5V BEC 5V 3A8V supply9V BEC 9V 2A8V supplyUSB Port: SH1.0 4-PinBuilt-in ESC with 20A continuous and peak 25A currentESC input voltage: 2-3SFC firmfware version: Betaflight_4.4.1_BETAFPVF405ESC firmware: C_X_70_48_V0.19.2.hex for BB51 Bluejay hardwareSignal support: D-shot300, D-shot600*The output current of BEC will decrease as the temperature increasesDiagramBelow is the diagram for F4 2-3S 20A AIO FC V1.ComparisonWe upgraded the FC fromF4 1S 12A AIO FC V3toF4 2-3S 20A AIO FC V1. The upgraded FC features an ESC with apulse overcurrent capacity of 25A,ensuring stable operation of the flight controller even in the event of motor stalling. The addition of a 9V 2A BEC power supply ensures the stable operation of the O3 HD VTX when the battery voltage is low. It also includes a O3 6-pin PMU allowing for connection to HD VTX without soldering. It integrates features such as a 16MB black box, with support for , external receivers, and other devices. The redesigned solder pad layout and USB connector make installation a

Más información para tu compra de DTRNYCZ Drone Parts for BET...

abrir

¿A qué tienda pertenece este producto?

DTRNYCZ Drone Parts for BET... pertenece al catálogo de Amazon

abrir

¿Cuánto demora el envío de DTRNYCZ Drone Parts for BET...?

Los tiempos de envió pueden variar según el producto. Recibí DTRNYCZ Drone Parts for BET... en tu casa en un tiempo de más de 26 dias.

abrir

¿Este producto tiene garantía de entrega?

Todas las órdenes tienen garantía de entrega en Uruguay. Si tu pedido no llegó luego de 60 días de realizada la orden, te devolvemos el total de tu dinero. Tener en cuenta que si la orden queda retenida en aduana por razones ajenas a Tiendamia (ejemplo: exceso de franquicias) no aplica esta garantía.

 
 
  Loading...