SKU/Artículo: AMZ-B079BN2J8V

MakerFocus 2pcs 0.91 Inch I2C IIC OLED Display Module 128 x 32 Pixel SSD1306 Driver Self-Luminous Display Board for Arduino/Raspberry Pi/ESP32 (White)

Detalles del producto

Disponibilidad:
Fuera de stock

Peso con empaque:
0.36 kg

Devolución:
No

Condición
Nuevo

Producto de:
Amazon

Viaja desde
USA

Sobre este producto

Introduction: 0.91-inch OLED display with balck-on-white support 128x32 resolution delivers crisp visuals with high contrast Ultra-wide viewing angle: >160° (widest viewing angle among displays) Wide voltage supply (3V~5V), compatible with 3.3V and 5V logic levels—no level shifter required Utilizes I2C bus, requiring only a few I/O pins to activate display Ultra-low power consumption: Only 0.06W during normal display (significantly lower than TFT displays) Specifications: Display Color: White Size: 0.91-inch Type: OLED Driver Chip: SSD1306 Resolution: 128*32 (Pixels) Module Interface: I2C interface Effective Display Area (AA Zone): 22.384x5.584 (mm) Module PCB Base Size: 12.00x38.00 (mm) Viewing Angle: >160° Operating Temperature: -20°C to 60°C Storage Temperature: -30°C to 70°C VCC Power Supply Voltage: 3.3V to 5V Interface Definition GND: Power Ground VCC: Power Positive (3.3V/5V) SCL: I2C Bus Clock Signal SDA: I2C Bus Data Signal Package Content: 2 * 0.91 Inch I2C SSD1306 OLED White Display Module

Fuera de stock

Selecciona otra opción o busca otro producto.

Medios de pago

Conoce más detalles

128 x 32 Pixel: Needn't backlight, these OLED module can self-luminous. It has super high contrast, bright and crisp dots, viewing angle is greater than 160°, even tiny fonts quite readable No Embedded Fonts: There are no embedded fonts inside these Arduino display module, you can create the fonts through font generation software Application: These OLED display can be used for Arduino, Raspberry Pi 5/4B/3B+/3B/2B/Zero, STM32, C51, ESP32 development board and so on. Showing graphical & textual information directly of your machines Parameters: Screen Size: 0.91-inch; Driver Chip: SSD1306; Resolution: 128*32; Color: White; Viewing Angle: >160°; Power Consumption: 0.06W; Voltage: 3.3V or 5V DC; Working Temperature: -20℃-60℃ What You Get: You will get 2 pieces 0.91-inch I2C OLED display module

Aceptamos múltiples medios de pago para tu comodidad

Tarjetas prepagas, débito y crédito

MakerFocus 2pcs 0.91 Inch I2C IIC OLED Display Module 128 x 32 Pixel SSD1306 Driver Self-Luminous Display Board for Arduino/Raspberry Pi/ESP32 (White)

Conoce más detalles