Oscilloscope
Style:
DSCope U3P100
En stock
0.76 kg
Sí
Nuevo
Amazon
USA
- DSCope U3P100 is a USB-based digital oscilloscope, which has a portable size (115x74x16mm), but powerful performance (up to 1GSa/s sample rate, USB 3.0 interface). With the easy-to-use and cross platform software, DSView, you can use your favorite computer to debug and analysis your circuits, observe the analog wave and its frequency spectrum at anywhere and anytime. Technical SpecificationsVertical system -Analog Bandwidth: 100MHz -Input coupling: DC or AC -Input impedance: 1MΩ // ~16pF -Input sensitivity range: 10mV/Div to 2V/Div -Vertical resolution: 8bits -Maximum input voltage: peaks ≤ ±100V -DC gain accuracy: ±6% -Vertical position range: ±5 divisions Horizontal system -Maximum sample rate: 1GSa/s(single channel) / 500MSa/s(dual channel) -Time base range: 2ns/Div to 10s/Div -Record Length (real-time capture): 1M (dual channel) / 2M (single channel) -Record Length (single capture): 128M (dual channel) / 256M (single channel) Trigger system -Trigger mode: Auto / Normal (ch0, ch1, ch0 & ch1, ch0 || ch1) -Trigger position range: 1% ~ 99% of record length -Trigger holdoff range: 1us ~ 10s -Trigger types: Edge (rising or falling) -Sensitivity: 0 ~ 0.625 vertical division -Trigger level ranges: ±4.4 vertical division from center screen Waveform measurements -Automated measurements: --Frequency / Period / +Duty /- Duty / +Count --Rise / Fall / +Width / -Width / BrstW --Amplitude / High / Low / RMS / Mean --Pk-Pk / Max / Min / +Over / -OVer Waveform math -FFT: --Spectrum magnitude Length: 1K ~ 16K --Vertical scale: Linear RMS or DBV RMS --Window: Rectangle, Hann, Hamming, Blackman, Flat_top -Math: --Add / Subtract / Multiply / Divide Waveform display -Time domain: Real-time view / Single capture view -X-Y mode: Lissajous Figure
IMPORTÁ FACIL
Comprando este producto podrás descontar el IVA con tu número de RUT
Conoce más detalles
2 analog channels, up to 100M front-end bandwidth and max 1GSa/s real-time sample rate. It's achieved by single-chip 1GHz ADC. Ultra-portable size, so that you can put it in your shirt pocket. And it's shipped with a storage box for your convenience. FPGA-based waveform processing engine. With 2Gbits hardware memory, it has 2M(single-channel) / 1M(dual-channel) sample depth in real-time mode, and 256M(single-channel) / 128(dual-channel) sample depth in single acquisition mode. USB 3.0 type-c interface, and it's totally USB port powered. Worked with DSView software, which is compatible with Windows, macOS and Linux. DSView also support FFT-based spectrum analysis and x-y mode lissajous figure display. It's also an open source software, you can find it on github.