Garantía de entrega
S&f stead & fast
S&F STEAD & FAST Annular Cutter Set, 2 inch Depth of Cut, 7/8, 1-1/8, 1-1/4, 1-1/2, 1-3/4, 2" Cutting Diameter, 3/4 Weldon Shank, Mag Drill Bits Kit for Magnetic Drill Press
Size:
3/4" shank 2" cutting depth Large
3/16" x 3"
3/16" x 4"
3/4 inch shank
3/4" shank 2" cutting depth
3/4" shank 2" cutting depth Large
Pilot Pin for Annular Cutter, 1/4" x 3"
Pilot Pin for Annular Cutter, 1/4" x 4"
Disponibilidad:
En stock
En stock
Peso con empaque:
2.08 kg
2.08 kg
Devolución:
Sí
Sí
Condición
Nuevo
Nuevo
Producto de:
Amazon
Amazon
Sobre este producto
- Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life
- Six HSS angular cutter bits with outside diameter in inches: 7/8, 1-1/8, 1-1/4, 1-1/2, 1-3/4, 2", 2 inch cutting depth for each annular drill bit cutter
- CNC-machined high precision annular drill bit set with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results.
- IMPORTANT Drill single layers of materials only. This series of annular cutter is NOT designed for drilling of multiple layers.
- Avoid premature failure of cutter by using a low feed rate when engaging the bit with the work piece, especially for the smaller cutters. Increase to recommended rate once bit is about 2-3mm in.
- Secure workpiece firmly before drilling. If workpiece is less than 1/2” thick, use a 3/8” steel sheet under it to ensure the magnetic drill will grip it firmly. There should be no movement between the workpiece and bit during drilling.
- Compatible with mag drills from the following brands: Alfra, BDS, Champion, Dewalt, Euroboor, Evolution, Hougen, Milwaukee, Ruko, Zelcan. Caution: if you want to use this annular cutter on a drill press, you need an extra annular cutter arbor for the drill bit cutter. Arbor is not included in this pack.
- Sturdy aluminum case holding six pieces of 2 inch annular cutter and 2 pilot pins
U$S 285,79
12% OFF
U$S 251,80
IMPORTÁ FACIL
Comprando este producto podrás descontar el IVA con tu número de RUT
U$S 285,79
12% OFF
U$S 251,80
¡Comprá en hasta 12 cuotas sin interés con todas tus tarjetas!
Llega en 10 a 15 días hábiles
con envío
Tienes garantía de entrega
Este producto viaja
de USA ![]()
a tus manos en
![]()
a tus manos en
Compra protegida
Disfruta de una experiencia de compra segura y confiable
![]()
Garantía de entrega
Con Tiendamia todas tus compras cuentan con Garantía de Entrega o devolución total de tu dinero.
Compras 100% seguras y garantizadas, para que pidas lo que soñás y lo recibas del mundo a tu puerta.
Saber más.
Tarjetas prepagas, debito, y credito
Paga hasta en 12 cuotas sin interés con tarjetas de crédito.
Visa
Mastercard
American Express
Dinners
Discover
Lider
Midinero
OCA
OCA Blue
Tarjeta PREX
Pagos a través de PayPal
Paga en dólares con Tarjetas internacionales a través de PayPal.
PayPal
