LCR MF9 Multi Function Transistor Tester TFT Diode Triode Capacitance Meter LCR ESR NPN PNP MOSFET IR Tester Multimeter
En stock
0.36 kg
Sí
Nuevo
Amazon
USA
- Built-in 300MAH 4.2V lithium battery, rechargeable, capacitance: 25pf ~ 100mf, resistance :0.01 ~ 50Ω, inductance :0.01 mh ~ 20h, battery :0.1 ~ 4.5v, it is not recommended to use a tester to measure the battery! The battery voltage must be less than 4.5V, otherwise the tester may be damaged!The display adopts TFT 1.8 inch color screen display, various parameters are graphically displayed, the test speed is fast, and the effective component test is completed within 2 seconds (in addition to the larger capacitance, the large capacitance measurement also needs a longer time).Automatic detection of components such as NPN and PNP transistors, n-channel and P-channel MOSFETs, IGBT diodes (including double diodes), thyristors, transistors, resistors and capacitors.The pin layout of components is automatically tested and graphically displayed on a color screen. Infrared codes can be detected (NEC format infrared remote control is supported)Equipped with a calibration needle for more accurate testing of small resistors, supporting the measurement and symbol display of two resistors with a resolution of 0.1 ohms and a maximum measurement value of 50 meghm. Capacitance above 10UF can display VOSS and ESR. Resistance below 2100 ohms will measure inductance, and inductance below 10UH will measure only DC resistance.Detect amplification factors and bases of transistors, MOSFET protection diodes, etc. Determine the forward bias voltage of the emitter transistor. Can distinguish between loss and enhanced MOSFETs. Measurement of mosfet gate threshold voltage and gate capacitancePackage Included:1*LCR MF9 Transistor Tester1*Accessory kit1*Cable
IMPORTÁ FACIL
Comprando este producto podrás descontar el IVA con tu número de RUT
Conoce más detalles
Built-in 300MAH 4.2V lithium battery, rechargeable, capacitance: 25pf ~ 100mf, resistance :0.01 ~ 50Ω, inductance :0.01 mh ~ 20h, battery :0.1 ~ 4.5v, it is not recommended to use a tester to measure the battery! The battery voltage must be less than 4.5V, otherwise the tester may be damaged! The display adopts TFT 1.8 inch color screen display, various parameters are graphically displayed, the test speed is fast, and the effective component test is completed within 2 seconds (in addition to the larger capacitance, the large capacitance measurement also needs a longer time). Automatic detection of components such as NPN and PNP transistors, n-channel and P-channel MOSFETs, IGBT diodes (including double diodes), thyristors, transistors, resistors and capacitors. The pin layout of components is automatically tested and graphically displayed on a color screen. Infrared codes can be detected (NEC format infrared remote control is supported) Equipped with a calibration needle for more accurate testing of small resistors, supporting the measurement and symbol display of two resistors with a resolution of 0.1 ohms and a maximum measurement value of 50 meghm. Capacitance above 10UF can display VOSS and ESR. Resistance below 2100 ohms will measure inductance, and inductance below 10UH will measure only DC resistance. [Satisfactory Service]: We Provide 24-hour online service,If you encounter any problems, Please email SELLER SUPPORT (Not Amazon support), we will give you a perfect solution.